Your Setup Made Simple
Watch the video or follow the steps below to set
up your GigaSpire u4hm.
Follow these steps to get your GigaSpire u4hm set up—your patio’s about to get a major WiFi level-up!
Start by unboxing your new outdoor WiFi system—everything you need is inside, ready to make your outdoors awesome.
Choose a spot clear of obstacles—think wall or pole, within 15’ of a power outlet if AC-powered.
Screw the mounting plate to the wall vertically—your GigaSpire’s ready to stand tall and proud!
Pop off the base cover and thread your cable and power cords through – neat and tidy, just how you like it.
Grounding’s optional but recommended in lightning-prone areas—check the guide or call an electrician if you’re unsure.
Choose your power style—plug into an outdoor outlet or use Power over Ethernet via an Ethernet cable.
Open
the CommandIQ app, head to “Network,” click “Add Equipment,” and scan the QR
code on the back—boom, you’re in!
Once in the app, take a moments to name your
device for easy identification.
Slide your GigaSpire u4hm onto the mounting bracket—your outdoor WiFi’s ready to rock!
Once your system is installed, run a bandwidth test in the CommandIQ app to test your connection.
Grounding your GigaSpire u4hm keeps your system safe and sound. If you’re not sure how to ground it, please check with an electrician.
Pick a spot clear of obstacles, ideally within 15’ of a power outlet if using AC power—think wall or pole for the best signal.
It’s optional but recommended in lightning-prone areas for extra safety—check with an electrician if you’re unsure!
AC power uses an outlet with WiFi data; PoE uses an Ethernet cable for both power and data—your choice!
We’re here for you! Chat with our 24/7 support team or watch the video above—we’ll get you connected in no time.
Take Your Outdoor WiFi to the Next Level with Arlo cameras
Madison
6400 Excelsior Dr.
Madison, WI 53717
800-XXX-XXXX
Milwaukee
1111 Vel R. Phillips Avenue.
Milwaukee, WI
53203
800-XXX-XXXX
